Do-it-yourself wooden garden storage boxes are a simple method of storing seasonal and temporary items. Wooden storage boxes may be used within the garage, on the patio or in a storage shed to hide seasonal equipment, like patio sets, pool equipment, bikes and machinery. While it is possible to purchase a storage box at a hardware store, building a wooden one at home is a cheaper alternative as well as the box can be personalised and custom-built to fit into any space.
Look at the space where Top Favourite Garden Storage Box is going to be placed, and write down the figures for that height, width and depth you need the package to become. Draw the pieces necessary for the 4 sides in the box on the plywood sheets, utilizing a pencil. You will need two side pieces measuring height by depth, as well as the front and back pieces should measure height by width. Eliminate the 4 pieces using the saw. Use the sandpaper to create the sides and surfaces smooth and splinter-free.
Arrange one of the side pieces so it will be perpendicular towards the front piece. Both pieces needs to be on end, and also the end of the side piece ought to be included in the top side of the front piece. Quite simply, the side pieces is going to be attached within the front and back piece ends.
Attach both pieces using the drill and also at least four screws from the front piece. Attach the 2nd side piece in the same way to the opposite end of the front piece. Ensure the second side piece’s end is within the front piece. Last, attach your back piece with all the drill and screws, so both ends in the side pieces are included in this last piece. You should have a rectangular wooden frame.
Appraise the rectangular frame’s perimeter. This may give you the measurements for your bottom and lid pieces. Write the measurements down. Transfer the measurements towards the plywood, employing a pencil. Be sure they’re square, then cut them out with the saw and sandpaper both pieces.
Attach the bottom piece by lining it up for the wooden frame. Put the level on the box to be sure the piece is level and even. Attach it with screws placed every 6 inches, drilling the screws from the bottom piece and into comfou four sides. When done, transform it over, so you have an open box without having a lid.
Attach two hinges to the lid piece, screwing them to the underside of one of many long sides. Flip the wooden garden storage box on its side to set up the lid properly. Line the lid as much as the box so the hinges are inside the box and attach the hinges using screws and also the screwdriver. Flip the wooden storage box right side up and close the lid.